Outro

Adapter for the Mobile Gas Flare L for use in blow-out units that are difficult to access. Connections: 2 1/2" ET with O-ring on the inlet side, DN50 Camlock coupling on the outlet side DN50 gas hose with Camlock nipple can be connected directly. Max. pressure 16 bar

5L container as water reservoir for smart level control. Container must be positioned 0,5 metres above smart level control. outlet with coupling series 21

As an extension for the Speedpipe manifold for connecting a pressure sensor (connection series 21) and control manometer (connection series 2500). By using this connection adapter, all 6 speed pipes can be connected to the speed pipe distribution strip at the same time.

for use in the professional gas leak detection With a capacitive 10-finger multi-touch outdoor display, this system is ideal for optimising work in the field. - Intel® Core i5-10310U vPro processor - 512 GB NVMe Opal SSD, 16 GB RAM - Highly luminous 10.1 "large WUXGA display (1920 x 1200) with up to 1000 cd / m2 - Capacitive 10-finger multi-touch screen and digitizer - Interface: 1x USB-A 3.2, 1x USB-C (Thunderbolt 4), 1x LAN, 1x DC in, 1x port replicator, 1x dual antenna connector - Wireless interface: Intel Wi-Fi6E AX211, Bluetooth V5.3 class 1, 4G/LTE (EM7421) - Front & rear camera (2MP front camera, 13MP rear camera) - Water and dust proof (IP65) * - Up to 10 hours of battery life (50 Wh) - User replaceable battery - Lightweight design - Weight approx. 1.1 kg - Withstands drops from up to 180 cm height* - 3-year standard warranty - incl. power supply & digitizer pen *manufacturer's information

Simple assembly. A tripod is required to hold the gas flare securely in place.

Connecting accesory for ignition module for gas standpipe including shut-off valve and 5 m propane hose

with bayonet coupling

including pressure reducer (1bar), control manometer, couplings (S21 and S20) for concentration measurements and pressure measurements and ball valve, Kamlok Nippel inlet side and Kamlok coupling outlet side, max. inlet pressure 10 bar, outlet pressure limited to 1 bar for Mobile Gas Flare S

Grounding cable, length 6 m for gas standpipe - copper cable 25 mm² with transparent isolation and bayonet plugs on both sides

for gas standpipe Copper cable 25 mm² with transparent isolation and bayonet plugs on both sides

Propane hose rupture protection for ignition module protection against uncontrolled gas leakage in case of hose rupture 1,5 - 4 bar Mandatory use in the commercial sector and for hose lengths over 5 metres.

Replacement for defective scanner with spiral cable and angled connector

Enables communication between MPP 30-30/70-35 and the smart memo. Length: 5 m

for HMG, GasTest delta3 and SAFE EthanTest length approx. 10 m

Material: plastic

for SIGI EX, SAFE EthanTest, GOLIATH, HUNTER, Laser HUNTER and HUNTER H2

- for gas test standpipe - safe device to prevent flame breakthrough into gas pipeline or gas tank, appoved for any explosive gases, including hydrogen - brass-made adapter with 2 1/2 internal thread/ext. thread (with sealings) for direct connection to the gas test standpipe - IBExU 09 ATEX 2019 X, - explosion group IIA1, IIA, IIB1, IIB2, IIB3, IIB, IIC - according to DIN EN ISO 16852 - ATEX- Nr. / Typ : IBExU 20 ATEX 2115 X / DEF

Pressure drop test case according to DVGW G 469 C3 - System type EWE Scope of delivery: - case for pressure drop test with different volume - software for PC with USB connectiong cable - connecting hose 4 m 1620 - 1620 - connecting adapter with nipple S 2520 for test head - PTB calibration certificate (DAkkS)